Popular Searches:
Popular Searches:
Stock: 0
Price: 0.00
6. TF card slot 7.MINI USB port 8. Reset 9. String hole
Specifications
Video | HD 1280*720P |
Format | AVI, JPG |
Motion Detection | Support |
Night Vision | Support |
Working Time | 80mA Built-in Battery, Recording video about 40 minutes |
Storage | Support Micro SD card Maximum 32GB |
Charging | DC-5V |
PC Camera | Support |
Charging
1. Connect to computer charging, use USB cable connect with computer
2. Support recording while charging.
3. While charging, red LED light will keep flashing, after full charged, red LED light will keep on but stop flashing.
LED Indicator :
1. When the battery is low, Blue & Red LED light will flash fast together, then you need to charge the camera.
2. If not insert SD card, when you turn on the camera, Blue & Red LED light will flash for 2 seconds, then camera will shutdown automatically.
3. After turn on camera, if no opertation, 1 minute later camera will shutdown automatically.
Turn on/off camera
1. Long press ON/OFF key, Blue LED light will keep on, camera into standby mode.
2. Long press ON/OFF key again, camera will turn off.
Video Recording
In standby mode, short press ON/OFF key, Blue LED light will flash 3 times then turn off, camera start video recording. Short press ON/OFF key again, Blue LED light will keep on, camera will into standby mode.
Photo taking
After turn on camera, into standby mode( Blue LED keep on), short press Mode button again, LED light will change to Red , camera into photo mode , short press ON/OFF key to take a photo, Red LED will flash one time.
Motion Detection
In standby mode, Long press Mode button for 3 seconds, then loose your hand, then Blue and Red LED will flash 3 times, camera into motion detection video recording, short press ON/OFF key again to stop recording.
Night Vision
In standby mode, Long press ON/OFF key button for 3 seconds, then loose your hand,Red LED will falsh 2 times, then camera into night vision mode, short press ON/OFF key to start night vision video recording. Short press ON/OFF key again, will stop video recording and turn off night vision.
Reset
When camera get crash and stop working, you can use a pin insert into the reset hole , short press to restart the camera.
Time Setup
As below , after insert the SD card into camera, then connect camera to the computer, when you read the SD card , you can find a “TIME.TXT” document inside the SD card. Then you can change the time inside the TXT document
2RCA Plugs to 2RCA Plugs
3.5MM Stereo Plug to 2RCA Plugs
3.5MM Stereo Plug to 3.5MM Stereo Plug
3RCA Plugs to 3RCA Plugs
9.5 TV Plug to 9.5 TV Plug
9.5 TV Plug to 9.5 TV Plug MF
F Plug to F Plug
VALUE DVI Cable, DVI M-F, Dual Link
MFi iPhone 8-Pin Cable,with Nylon braid cable
VALUE Monitor Cable, DVI(18+1) M- HDMI M